Moteck SG2100A H H  DiSEqC Satellite Dish Motor

The new Moteck SG-2100 A is an upgraded verson to the SG 2100 motor,  35% faster and quieter. Specially designed for receivers with DiSEqC 1.2/USALS, the DG2100 H-H is able to drive dishes up to 1.1m. or 1.2m alloy dishes.  Everything is controlled via only one coaxial cable, the motor has  Manual east/west buttons for easy installation of moving the satellite dish, there is also a LED power indicator to tell you if you have power and a good voltage going to the motor with its green, red, orange traffic light system. 

The Moteck SG2100A is the same motor as the Technomate TM2200 super DiSEqC with High efficiency design - Compact structure - Ultra Low noise motor.

Here is how you connect the motor below.

Moteck SG2100 Satellite Dish Motor FAQ:

1. Do I need a separate power line to connect to the Moteck SG-2100A Satellite Motor?
   No. The motor gets its power from the receiver using the same coaxial cable running from the receiver to the LNB on the dish. You simply disconnect the cable from the LNB. Connect it to the Moteck SG-2100 HH Motor. Then run a short coaxial cable between the motor and the LNB. You are set.

2. How do I control the motor to move it East / West?
   The motor is controlled by the receiver's remote control. All receivers compliant with the DiSEqC 1.2, 1.3, or USALS protocol have the capability to run a Moteck SG-2100AHH motor. Once you initially setup the motor on the satellite arc and store the locations of the satellites, you will be able to move between satellites by simply changing the channel.

3. Does the motor also adjust for variation in elevation on the dish for each satellite?
   Yes it does.

4. Do I need to skew the LNB on a motorised dish?
   No you don't. Just set the skew at 0 and the motor will tilt the whole dish when it moves.

5. What is the benefit from motorising my dish?
   Well, by adding a motor to your system you will be able to receive satellite channels from several satellites instead from one only. That way you will gain many more channels economically without investing in many dishes and switches.

6. Where can I find out what channels are available free to air?
   There are many free to air channels and hobby channels  available in the UK and Europe on satellites such as Astra 19 east, Hotbird 13 east, Thor 1west, Hispasat 30west etc. There are channels from the UK and  from around Europe  See http://www.lyngsat.com for a complete listing of what is available. Anything with an F designation is FREE TO AIR.

• FEATURE:
   Special Design for Receiver with DiSEqC 1.2
   Only One Coaxial Cable Control
   Go To X Function
   High Efficiency
   Compact Structure
   Ultra Low Noise
   Adjustable Hardware Limits
   Easy Installation with LED Indicator
   Manual EAST / WEST button
   For Dish up to 1.2M